STRONG DECODER MENU
NO CHANNEL OR ADD CHANNEL
NO OR BAD SIGNAL
STEP 1: Press MENU on the remote control​​
STEP 2: Press OK Button
STEP 3: Enter Password (0000 is Default)
STEP 4: Select MANUAL SCAN​
STEP 5: Check if SIGNAL LEVEL is around 80%. If it is 80% and above then ............the DISH has shifted out of position and needed to be tightened to ............the origional position. Sometimes bad weather can cause this problem ............and is temporal.
STEP 5: But if SIGNAL LEVEL is around 10% to 30% then ​ ​
.......... Check the cabling from the receiver to the dish OR​
.......... The LNB is not working right and need to be replaced
​​
​
​​
STEP 1: Press MENU on the remote​
STEP 2: Press OK Button
STEP 3: Enter Password (0000 is Default)
STEP 4: Select MANUAL SCAN​
STEP 5: Select Astra 2B (28.2E) on the satellite menu by pressing RIGHT ............Button several times.
STEP 5: Press the GREEN Button on the remote. (Signal Quality turns green) ​
STEP 6: Enter the ff, Freq; 12522 SR; 19531 Pol; V (Multi TV Transponder)
STEP 7: Press OK to scan (Channels will be saved) ​
STEP 8: Press EXIT
​
​
​​
LNBF ERROR
​​This error can sometimes occur on the display screen in front of the decoder and the decoder will be restarted repeatedly. It occurs when the cable connecting the DISH to the RECEIVER has a cable bridge along it course (in simple terms; the negative wire is contacting the positive wire.
​
If the wire was joined during installation, check the joint. You can also check from the connectors at the ends of the cable (the round metal that is screwed to connect the cable to the decoder and the LNB)
​​
CLICK ON THIS LINK TO SEE HOW TO CONNECT A CABLE TO A CONNECTOR​
Sometimes just twisting the cable at the back of the decoder can solve this problem.
​
​​
-
​​Visit this site
-
Select decoder model e.g. SRT4669XII
-
Click on download.
-
Unzip the file on PC and copy onto USB drive
-
Plud USB drive into Decoder
-
Press Menu on remote control and select STORAGE
-
On the STORAGE MENU Select DATA TRANSFER
-
Select the file on the USB drive named e.g SRT4669XII_7111_ALL_IO_302p_20121226.zip
-
Press OK
-
Wait for about 5mins till the update is completed
-
It will restart once
-
Press ADVANCE KEY on the remote and Select any channel of your choice. The newly selected channel will be displayed on the upper right conner of the screen.
-
Press ADVANCE again to reduce the second screen size.
-
Pressing the RED button and see
​​