What Colour Wire Is Live In South Africa?
What Colour is a live wire?
Table of Contents
Wire Colour
——- —————-
Live Brown
Neutral Blue
Earth Yellow and Green
Is the red wire live in South Africa?
In South Africa these wires are identified as follows: red, white or yellow, blue – LIVE (PHASES) black – NEUTRAL.
What is black wire in electrical in South Africa?
NEUTRAL
What color wires go together?
Function
——–
L3
blue
yellow
What Colour is the live wire and what does it do?
The blue wire also referred to as the neutral wire, has the function of transferring electricity away from the appliance. The brown wire, otherwise known as the live wire, transfers electricity to the appliance.
How do you wire a socket in Ireland?
– Turn Off Power. Turn off the power at the mains. …
– Remove Socket Faceplate from Wall. Unscrew the face of the electrical socket and pull it out from the wall carefully. …
– Remove Wiring from Faceplate. …
– Affix Wiring to New Faceplate. …
– Insert Faceplate into Wall. …
– Turn On Power.
What Colour is live wire in South Africa?
brown
What does the live wire do?
The live is the wire that has a high potential. It means it carries the high voltage and delivers it to the appliance. It is also called hot wire or phase wire. For a complete circuit, the live conductor requires a neutral conductor to carry the current back to the power source.
What Colour wire goes to L and N?
Function label Color, common
—————— —– ———————-
Neutral N white
Line, single phase L black or red (2nd hot)
Line, 3-phase L1 black
Line, 3-phase L2 red
How do you wire a wall plug in South Africa?
The green and yellow wire must always be inserted into the top pin. The blue wire is inserted into the left pin (the pin is marked with a blue spot or the letter N). Tighten the little screw on each of the plug’s pins. Make sure the electrical cord is firmly gripped by the arrestor clips.
What color wires go to what?
US AC power circuit wiring color codes The protective ground is green or green with yellow stripe. The neutral is white, the hot (live or active) single phase wires are black , and red in the case of a second active. Three-phase lines are red, black, and blue.
