How To Activate Mojec Prepaid Meter
Log on to IE portal http://www.ikejaelectric.comwww.ikejaelectric.comWHO WE ARE. Buoyed by a mission to redefine customer experience and be the provider of choice wherever energy is consumed, Ikeja Electric Plc, Nigeria’s largest power distribution network powers lives and businesses with innovation and unwavering drive for excellence.https://www.ikejaelectric.com › about-ikeja-electricAbout IE – Ikeja Electric/keychange/. Input your meter number and click the submit button. Activation token will be displayed instantly.
How Do I Activate My Prepaid Meter For The First Time?
Table of Contents
Here is how to activate a prepaid meter after installation:Connect your CIU to a wall socket and switch it on. Ensure there is power supply to carry out this process.Input your meter number and press enter.Your CIU will display as successful. This means the process was successful and you can proceed with the recharge.
How To Activate Kplc Prepaid Meter?
M-PESA. Enter KPLC prepaid business number 888880 or 88888. Enter your 11 digit meter number. Enter amount between 250 and 35,000. Enter your M-Pesa pin.
What Is Mojec Prepaid Meter?
Why Is My Prepaid Meter Showing Connection Failed?
A prepaid meter sometimes loses connection to its counterpart meter “stubby” outside in your yard. Or you may get an error message because your household is drawing too much power. Or you may have accidently tried to load an old token.
How Do I Check My Mojec Prepaid Meter Balance?
If you can access your meter keypad, type in “009” (Mojec meter) and press the ‘enter’ button to check your meter balance. It’ll be displayed on your screen. Checking your meter balance is a way to know when you’re running out of units. However, you don’t have to wait until the last minute to take action.
Why Is My Ciu Not Working?
Possible Cause. The Customer user Interface Unit is not having a strong communication link with your meter through the power source. Weak batteries inserted into the Customer user Interface Unit. The Customer user Interface Unit not paired with the meter.
How Do I Know If My Kplc Meter Is Registered?
To verify if your account is registered under our. upgraded bill system INCMS, kindly send the first part. of your a/c no(without the-01) to 95551 preceded by. the word status (eg.
What Is Tamper Code In Prepaid Meter?
What does a tamper code look like?
A prepared meter tamper code needed to clear the errors comes in a 20 digit number. A set of three tamper codes are normally given to the customer and he or she is expected to use one and keep the remaining two in case of another occurrence.
Which Number Can I Use To Call Kplc?
97771
Is Mojec Meter A Smart Meter?
How Much Is A Mojec Meter?
She stated: “The approved NERC prices for meters are N63,061.32 for single-phase meters and N117,910.69 for three-phase meters (VAT inclusive) and this prices cover the cost of meters and installation.” These are the prices that customers are required to pay under the MAP scheme.
How Do I Check My Mojec Meter Number?
Check your prepaid meter number in these easy steps.Conlog (041 and 042): Press #4#Hexing (142 and 140): Press 804 and your enter button.Landis & GYR (071 and 070): Press i025 and your enter button.Mojec 021: Press 10 and your enter button.Mojec(450 and 457): Press 100 and the enter button.
Why Is My Prepaid Electricity Meter Not Accepting My Token?
If your meter has not been recoded, it will not accept the tokens you have purchased, which means it will stop working. All prepaid meters must be recoded, whether you are an Eskom customer or a municipally supplied customer.
Why Is My Prepaid Meter Rejecting The Token?
A : First thing you can do is make sure you are entering the correct 20-digit recharge token. If the token is still rejecting, make sure you bought the recharge token for the correct meter number. Tokens can only be used with the prepaid meter number you entered when purchasing the token.
Why Is My Smart Meter Monitor Not Connecting To The Meter?
One of the most common ways to correct this issue is to turn your IHD off and move it closer to where your electricity meter is located. Turn the IHD back on and this should restore the connectivity and begin to display your data again within 24 hours.
How Do I Stop My Mojec Prepaid Meter From Beeping?
Did you know you can turn off that very annoying sound your electricity prepaid meter makes when it’s running low on units?
If you use MOJEC meter (picture attached), press 045 on the input and then press “ENTER” (red button). The beeping sound will go off.
What Are The Problems With Prepaid Meters In Nigeria?
Some of the identified challenges are absence of vending infrastructure, non-tripping of the contractor, the cost of acquiring the meter, and delays in receiving and installation of prepaid meters.
How Do I Borrow A Unit On My Mojec Meter?
How do I borrow units?
On ZTE: press any key. On Mojec: press 8888.
How Do I Turn On Ciu?
The CIU has two methods of powering: – batteries or a power adaptor. BATTERIES The CIU can be powered from batteries, using two 1.5V AA batteries (Alkaline recommended) as shown in Figure 3 below. Take care to install the batteries correctly, + (plus) sign at the bottom of the unit as shown.
How Do I Check My Meter On Ciu?
0:253:10How to know your CloU Meter Number ,credit balance and various codesYouTubeStart of suggested clipEnd of suggested clipSince we can’t plank the pole. Now. So you press 0 65 enter wait for it to connect. Then it willMoreSince we can’t plank the pole. Now. So you press 0 65 enter wait for it to connect. Then it will show you the meter. Number like that that is the meter number. And to know the balance.
Why Is My Meter On But No Electricity?
If you have power at the meter but not in your home, check the breakers. A tripped breaker or blown fuse is often the cause of a full or partial loss of power. Find your main breaker panel.
How Do I Activate My Meter Number Online?
Log on to IE portal http://www.ikejaelectric.com/keychange/. Input your meter number and click the submit button. Activation token will be displayed instantly.
How Do I Unlock My Kplc Meter?
To resolve this issue, you should contact the KPLC Customer Care team at the number provided (97771) and explain the situation to them. They will be able to assist you in unblocking the meter number and ensuring that your account is up to date.
Do Kplc Tokens Expire?
Your Token Can Expire After getting your electricity token, you are required to enter it into your meter. If you cannot enter it into your prepaid meter for some reason, don’t fret. Your token is valid for 3 months. If you try to enter a token and you get the response ‘old’, it simply means that it has expired.
Why Is My Electric Meter Flashing 88888?
If you view your Smart Meter and see 8888888, this means the display is in ‘test’ ‘mode, indicating the meter is working properly. After a brief moment more numbers will appear. This is your meter reading. To find out how much energy (kWh) you’ve used over a given time, take an initial meter reading.
What Is Prepaid Meter Bypass?
Bypass in prepaid meters is a signal to let you know that the meter has detected a suspicious connection in between your wirering and/ appliances.To emphasis the urgency of the issue the meter is made to rush so as to make you address the matter as fast since it drains the units in a crazy manner.
How Do I Know If My Meter Is Tampering?
The next way to detect visible and physical tampering. Typical signs are if the seal has been removed from the meter, the bottom cover is loose or if any additional wiring connections to and from the meter can be seen.
How Does The New Prepaid Electricity Meter Work?
What Is Tamper Code In Prepaid Meter?
What does a tamper code look like?
A prepared meter tamper code needed to clear the errors comes in a 20 digit number. A set of three tamper codes are normally given to the customer and he or she is expected to use one and keep the remaining two in case of another occurrence.
How Do You Hook Up A Prepaid Meter?
0:060:59Installing a Recharger 80 AMP Single Phase Prepaid Meter – YouTubeYouTubeStart of suggested clipEnd of suggested clipPress 865 to activate the tamper. The screen will say success completing your installation. VisitMorePress 865 to activate the tamper. The screen will say success completing your installation. Visit our website or contact us for.
How Do I Enter My Electric Meter Code?
0:301:17How to: Manually enter your top-up on your smart meter – YouTubeYouTubeStart of suggested clipEnd of suggested clipCode then press the red B. Button your top-up transaction should now be processed. And credited toMoreCode then press the red B. Button your top-up transaction should now be processed. And credited to your meter. Once the top of his processed.
