How To Treat Borehole Water In Nigeria?
Nigeria’s main water resources are: Ground Water or brackish water is from water located in the pore space of soil and rock “Borehole well”, which can be treated using Reverse Osmosis Systems, Chemical Dosing, UV Water Sterilizer.
How can I treat my borehole water?
Table of Contents
Fill the bucket with clear water • Add 1g of HSCH powder and stir until dissolved (0.5g for every10 litres in the bucket) • Pour the disinfectant into the borehole • Make up sufficient buckets of disinfectant to replace the total volume of water in the borehole.
How long does it take for borehole water to be clean?
Can you put too much chlorine in a well?
Avoid putting too much chlorine into the septic system, too much chlorine may kill the bacteria needed for septic decomposition. Reconnect any carbon filters (if the shock was due to unsatisfactory test results, replace with new carbon filters).F
Can you remove iron from bore water?
In order for iron to be removed from the bore water, it needs to be oxidised with air or another oxidant. Thus, the ferrous iron is oxidised into ferric iron, which precipitates in iron hydroxide – Fe (OH)3.
How do you inject chlorine into water?
Metering pumps are used to inject a small amount of chlorine (sodium hypochlorite solution, or calcium hypochlorite solution) into the water, usually in conjunction with a contact tank. The pumps draw chlorine bleach from a solution tank and pump it into a pipe under pressure.
How do I chlorinate my well water system?
Overview. Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.
How long does it take for a well to clear up?
How do you apply chlorine to borehole water?
How long does it take to flush chlorine from a well?
It can take 30 minutes to 24 hours or more to flush all of the chlorine from the well. ►Once the chlorine is gone from the well, open up each fixture one at a time until the chlorine smell is no longer present. This will purge the remaining chlorine from the water system.
How do you remove iron from borehole water yourself?
Ion-exchange water softeners can handily remove low levels of ferrous iron from the water. Water softeners are primarily used to remove water hardness minerals from water through ion exchange, a process where sodium ions are exchanged for positively-charged mineral ions.O
