What Is Com In Electrical Switch?
What wire goes to L1 and L2?
Table of Contents
The yellow wire goes into the common terminal, red goes into the L1 terminal and blue goes into the L2 terminal. The grey wire goes in the common terminal, the brown wire goes in the L1 terminal and the black wire goes in the L2 terminal.
Can you wire L1 and L2 together?
You would combine the cables at both ends and connect as a single feed to both appliances. Not a split L1and L2 arrangement. 13.5mm might mean 6mm T&E.6
Does it matter which wire goes where on a light switch?
It doesn’t matter as long as you do it the same on both switches. So, if you connect it to the upper right terminal on one switch, connect it to the upper right terminal on the other switch. Connect the second traveler wire to the terminal opposite the red wire terminal.2
What does L1 and L2 mean in electrical wiring?
The incoming circuit wires that provide the power are referred to as the line wires. L1 (line 1) is a red wire and L2 (line 2) is a black wire. Together, they show the motor voltage. Having both an L1 and L2 indicate that the motor voltage may be 240 volts.
Does the live wire go to L1 or L2?
Wiring a One Way Switch A one way light switch has two terminals which is a common marked as COM or C. The common is for the live wire that supplies the input voltage to the switch. The other terminal is marked as L1 and is the output to the light fixture.
What does L1 L2 and COM mean?
The single direction plane switch has two L1 terminals, the terminal to which the neutral cable is connected – the blue cable (traditional black, before changing). COM or Common is the terminal to which the live core cable is connected – this is the brown cable (red era).
What color wire goes where on a light switch?
A standard single pole light switch will simply require you to attach the black (load) wire into it, and then the black wire leaving the switch and to your lights. The switch serves to cut the power from reaching the light switch. The white or neutral wire bypasses the switch and goes straight to your lights.
What does L1 L2 and COM mean on a switch?
The single direction plane switch has two L1 terminals, the terminal to which the neutral cable is connected – the blue cable (traditional black, before changing). COM or Common is the terminal to which the live core cable is connected – this is the brown cable (red era).
What wires go together on a light switch?
A standard 14:2 cable that contains a white wire, a black wire, and a ground wire, carries power from the breaker to the switch box. A 14:3 cable with a black, white, red, and ground wire connects the first switch to the second switch and also to the light.2
What does L L1 and L2 mean on a light switch?
Two way switching means you can switch the same light fixture from two switches that are located in different sides of a room. Two way switches have a COM terminal as well as L1 and L2 terminals. When L1 is off L2 would be on. When L1 is on L2 would be off.
What does L1 and L2 mean on a light switch?
Wiring a One Way Switch The other terminal is marked as L1 and is the output to the light fixture. When you’re wiring decorative light switches such as chrome or stainless steel etc, you’ll find that the switch will also have an L2 terminal which means it’s a two way switch.
How do you wire L1 and L2?
The incoming circuit wires that provide the power are referred to as the line wires. L1 (line 1) is a red wire and L2 (line 2) is a black wire. Together, they show the motor voltage. Having both an L1 and L2 indicate that the motor voltage may be 240 volts.
Do all light switches have a neutral wire?
Houses built before that may or may not have a neutral wiring. If there is an outlet (wall receptacle) near the switch, most likely that switch has a neutral. Switches that are ganged together have a much higher likelihood of having neutrals, no matter what year.2
Is L1 and L2 the same as 1 way and 2 way?
Two way switching means you can switch the same light fixture from two switches that are located in different sides of a room. Two way switches have a COM terminal as well as L1 and L2 terminals. When L1 is off L2 would be on. When L1 is on L2 would be off.
